PERANCANGAN ALAT BANTU PENIMBANGAN GLYCERINDENGAN METODE VALUE ENGINEERING(STUDI KASUS : PT. KALBE FARMA TBK)
Keywords:
perancangan produk; alat bantu; Value Engineering; glycerinAbstract
PT. Kalbe Farma Tbk. adalah perusahaan farmasi yang salah satu produknya adalah CBPC1 atau obat luka bakar. Waktu penimbangan CBPC1 mengalami keterlambatan karena keterlambatan salah satu bahan bakunya yaitu glycerin. Waktu penimbangan glycerin yang terjadi sekitar 2,7 kali lipat dari standar waktunya. Alat bantu yang digunakan untuk penimbangan glycerin belum efisien. Untuk itu dilakukan penelitian yang bertujuan menentukan rancangan alat bantu penimbangan glycerin yang bisa menurunkan waktunya dengan metode Value Engineering. Hasil penelitian menunujukkan bahwa rancangan alat bantu dapat menurunkan waktu penimbangan sebesar 85% dan juga menurunkan biaya penimbangan per tahun sebesar 85%.
References
Berawi, et.al.2011, Aplication of Value
Engineering Design Stage in Indonesia
Construction Industry, Proceeding of the
12th International Conference on QiR
(Quality in Research) Bali 2-11, Indonesia,
pp. 2121-2126.
Estêvão, J.V., Carneiro, M.J. and Teixeira, L.
2014, Destination Management Systems:
creation of Values for Visitors of Tourism
Destinations, International Journal of
Technology Management,, Vol. 64, No. 1,
pp. 64-88.
Ibusuki, U. and Kaminski, C.P. 2007, Product
Development Process with Focus on Value
Engineering and Target-Costing : A Case
Study in An Automotive Company. Int,
International Journal of. Production
Economics, Vol. 105, No. 2, pp. 459-474.
Makarim, C.A.2017, Value Engineering
E_Learning Modul, Jakarta, Indonesia.
Mario, F. and Setiawan, H.2019, Perancangan
Alat Prush (Pembersih Busi Sederhana)
dengan Pendekatan Ergoomi dan Value
Engineering (Studi Kasus di UKM Bengkel
Motor Koli Palembang), Jurnal Rekayasa
Industri, Vol. 1, No. 1, pp. 21-30.
Maryani, A., Ratnasanti, D.A. and Partiwi, S.G.
2019, Perbaikan Perancangan Alat
Pengupas Mete Menggunakan Metode
Value Engineerign, Journal of Industrial
Engineering and Management, Vol. 14, No.
02, pp. 82-91.
Miles, L.D.2002, Technique of Analysis and
Engineering, Mc. Graw-Hill, New York,
USA.
Mostafaeipour, A. 2016, A Novel Innovative
Design Improvement Using Value
Engineerign Technique : A Case Study,
Journal of Optimization in Industrial
Engineering, Vol. 19, pp. 25-36.
Mutmainah and Sari, M. 2018, Perancangan Alat
Bantu Alat Pemantau Area Produksi yang
Ergonomis dengan Metode Value
Enginering (Studi Kasus PT. BT), Jurnal
Integrasi Sistem Industri, Vol. 5, No. 1, pp.
57-68.
Pedju, M.J. 2013, Concidering The Integrated
Value Engineering and Risk Management
Technique During The Design Phase in
Construction Projects-Its Implications to
Project Objectives (A Case Study on
Certain Irrigation Project North Sulawesi
Province), Jurnal Ilmiah Media Engineering,
Vol. 3, No. 3, pp. 214-226.
Peng, H.M., Tian, J.H. and Gaol, J.L. 20116,
Mechanical Product Design Based on Value
Engineering, Proceeding of 2016 2nd
International Conference on Modern
Education and Social Science (MESS
2016), pp. 1181-1188.
Shengquan, H. and Hongyu, W. 2010, The New
Product Development Project Optimal
Choice Based on Value Engineering
Theory, Copper Engineering, Vol. 4. pp.
111-114.
Shen, Q.P.and Liu, G.W. 2007, Reengineering
the Strategic Decisiona Making Proces of
Public Projects in China‟s Construction
Industry: A Value Management Approach,
Proceeding of International Conference on
Construction & Real Estate Management,
Vols. 1–2, pp.948–951.
Short, et.al. 2007, Impacts of Value Engineering
on Five Capital Arts Projects, Journal on
Building Research and Information, Vol. 35,
No. 3, pp. 287-315.
Suryawidayat, Y.W. 2011, Pengembangan
Produk Komponen Cylinder Head dengan
Pendekatan Quality Function Deployment
dan Value Analysis, Skripsi, Fakultas Teknik,
Universitas Indonesia, Jakarta, Indonesia.
Yan, H. 2016, Application of Value Engineering
Theory in Enterpise Product Design,
Proceedings of The Internasional
Conference on Arts, Design and
Contemporary Education (ICADCE 2016, pp.
714-716.
Ulrich, K. and Eppinger, S. 2001, Product Design
and Development, Mc. Graw-Hill, New York,
USA.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Helena Sitorus, Zulkani Sinaga, Ahmad Nurwibowo (Author)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
